The 1RM Long Tube Crossmember is 75x75x3mm tube steel crossmember that is often used in a bridging cell (a wider area that joins two lifting cells) or to join Obsidian racks Ebony Cable systems together.
Built to withstand serious use, the 1RM Long Tube Crossmembers are CAD designed, manufactured from 75mm x 75mm x 3mm tube steel and 8mm thick end plates, fully laser cut, robot welded and coated in a commercial grade, matte-black, textured powder-coat. Ready for any environment!!
And as a part of the 1RM family, they are fully modular so your rig systems can be uninstalled, reconfigured into a new design and re-installed, allowing your equipment to grow as you do.
Product Specifications:
- 75mm x 75mm x 3mm tube steel crossmember
- 17mm laser cut holes with 100mm spacing
- 8mm steel end plates - 17mm holes at 100mm spacing
- 1676mm full unit wide
- M16 Attaching hardware included
- Compatible with 1RM:
- Rig systems
- Obsidian Racks
- Ebony Cable Machines
- Modular Storage Systems
- CAD designed, laser cut & robot welded
- Matte-black, textured powder-coat
- Full commercial grade
Dimensions:
- Length: 75mm (endplate)
- Width: 1676mm
- Height: 212mm (endplate)
- Bar diameter: 32mm
The 1RM Systems
Every component from the 1RM Rig system is CAD designed, laser cut and robot welded to ensure you’ll get the quality you need for your space – whether a ten cell fitout, or a single cell for home, and with two different height uprights, heavy duty custom j-hooks and spotters, 4 styles of chin-up bars and over 40 accessories to choose from – you’re sure to find a configuration to suit. The system is fully modular - meaning that you can start with one cell and add to this over time as your needs change. There are countless configurations you can build and customise to suit your space, budget & training requirements.
Looking for 1RM accessories?
There are many. Browse our Rig Accessories page and if you can’t find what you’re after, need a different or custom configuration, installation or would just like to chat about the best rig configuration for you, give us a ring on 03 9462 3943 or email us at info@littleblokefitness.com.au.
Other Considerations:
Space Required. These crossmembers are 1676mm wide - meaning this is the gap they need to fit into. If purchasing for any system that is not 1RM branded, please ensure this will fit your gap.
Installation. This 1RM crossmember is supplied with black M16 mounting hardware - including 4 bolts, 8 washers and 4 locknuts as required to fit the unit to a 1RM upright, squat rack, ebony rack or wall mounted chin-up bar bracket.
Different hardware may be required if fitting to another surface or another brand.
i