Built to withstand serious use, the 1RM rig system uprights are CAD designed, manufactured from 75mm x 75mm x 3mm steel tube and 10mm thick foot plates, fully laser cut, robot welded and coated in a commercial grade, matte-black, textured powder-coat. Ready for any environment!!

Available in 2510mm and 3600mm heights, with 50mm hole spacing, they boast 17mm accessory holes top and bottom to fit all 1RM pull-up bars and crossmembers, and 32 x numbered 27mm J-hook holes that fit all 1RM rig accessories, including our modular storage range.

And as a part of the 1RM family, they are fully modular so your rig systems can be uninstalled, reconfigured into a new design and re-installed, allowing your equipment to grow as you do. 

Specifications:

• 75x75mm 11 gauge (3mm) steel tube
• 10mm thick, 150 x 150mm footplate with 4 laser cut bolt holes
• 27mm j-hook holes
• 17mm accessory holes
• Compatible with 1RM:
  • Rig systems
  • Obsidian Racks
  • Ebony Cable Machines
  • Modular Storage Systems
• CAD designed, laser cut & robot welded
• Matte-black, textured powder-coat
• Full commercial grade
  

Dimensions:

• Length: 150mm (footplate)
• Width: 150mm (footplate)
• Height: 3600mm

The 1RM Systems

Every component from the 1RM Rig system is CAD designed, laser cut and robot welded to ensure you’ll get the quality you need for your space – whether a ten cell fitout, or a single cell for home, and with two different height uprights, heavy duty custom j-hooks and spotters, 4 styles of chin-up bars and over 40 accessories to choose from – you’re sure to find a configuration to suit. The system is fully modular - meaning that you can start with one cell and add to this over time as your needs change. There are countless configurations you can build and customise to suit your space, budget & training requirements.

Looking for 1RM accessories?

There are many. Browse our Rig Accessories page  and if you can’t find what you’re after, need a different or custom configuration, installation or would just like to chat about the best rig configuration for you, give us a ring on 03 9462 3943 or email us at info@littleblokefitness.com.au.

Other Considerations:

Space Required. Please note you need a minimum ceiling clearance of 3.7m for installation. It is recommended around 4m to 4.1m ceiling clearance to have full functionality overhead for barbell work and bar muscle ups. 

Installation. This 1RM Upright needs to be mounted to the floor. They can be fixed to a floor or structural surface using M12 or M16 size dynabolts / concrete screws (not supplied). Each upright requires four screws. The method used to install the uprights is dependent on the floor they are being affixed to and your preferred method. Any M12 or M16 fixing 75mm or longer is suitable for the intended purpose of functional training depending on the thickness of the flooring.